Top Case Mounting Set
CBF600 / CBF600N (04-09)

Ref: 260FZ /M5 /1

Price: £88.30 (Including VAT at 20%)

Bike-specific Monorack Set. This includes Monorack arms and an M5 Monokey plate, to mount a single Givi Monokey Top Case. Includes the fittings required to attach M5 plate to the Monorack arms.

This item is NOT suitable for use with the Honda pannier system

Quantity:  

Top Case Mounting
CBF600 / CBF600N (04-09)

Ref: 260FZ /1

Price: £52.58 (Including VAT at 20%)

Bike-specific Monorack arms to mount a single Givi Monokey Top Case. This does not include the M5 Monokey plate, which is required to mount a case.

This item is NOT suitable for use with the Honda pannier system

Quantity:  

Tubular Side Case Holders
CBF600 / CBF600N (04-09)

Ref: PL174 /1

Price: £107.94 (Including VAT at 20%)

A Pair of bike-specific Tubular Side Case Holders, to mount Givi Monokey Side Cases. Includes all fittings.


Information:
Can be mounted with or without Monorack.
Cannot be mounted with original carrier.

Quantity:  

Tubular Side Case Holders
V35
CBF600 / CBF600N (04-09)

Ref: PLX174 /1

Price: £97.16 (Including VAT at 20%)

A Pair of narrow profile bike-specific Tubular Side Case Holders, to mount narrow profile Givi V35 Side Cases ONLY. Includes all fittings. Other Monokey cases will NOT fit on this mount.


Information:
V35 Monokey Side cases only.
If this item is to be fitted to a bike WITHOUT a Givi Monorack, the PLX174KIT (below) must also be purchased.

Quantity:  

Quick-Release
Tubular Side Case Holders
V35
CBF600 / CBF600N (04-09)

Ref: PLXR174 /1

Price: £148.50 (Including VAT at 20%)

A Pair of narrow profile bike-specific Tubular Side Case Holders, to mount narrow profile Givi V35 Side Cases ONLY. Includes all fittings. Other Monokey cases will NOT fit on this mount.

The New System PLX-Rapid fitting allows you to attach and remove the side-case mounting hardware (the Tubular Side Case Holders) quickly and easily.
The new system, designated as the PLXR, is supplied with special Half-Turn screws which allow you to attach the large, visible, side-case hardware structure to much smaller supports that remain virtually unseen (see upper image).
When the side-cases are not in use, it will take a only half turn of the specially designed screws, using a GIVI key specific to your hardware, to convert the rear of your bike to it's original, hardware-free, look.
All the PLXR systems are designed for the use of any standard padlock on both the left and right sides to prevent removal of the frames from the bike.

Information:
The PLXR174 may be fitted with OR without the Givi Monorack.
The PLX174KIT is NOT required.

Quantity:  

Fitting kit for V35
CBF600 / CBF600N (04-09)

Ref: PLX174KIT /1

Price: £17.05 (Including VAT at 20%)

Bike specific fitting kit. V35 only.
Only required if you want to fit the PLX174 (above) to a bike WITHOUT the Givi Monorack.

NOT required for the PLX R 174.

Quantity:  

Soft Luggage Frame
CBF600 / CBF600N (04-09)

Ref: T218 /1

Price: £38.11 (Including VAT at 20%)

Bike-Specific tubular frame for soft luggage


Information:
Can be mounted with or without Monorack for years 05-06

Quantity:  

Engine Guard
CBF600 / CBF600N (04-09)

Ref: TN369

Price: £80.93 (Including VAT at 20%)

Bike-Specific Engine Guard


Information:
up to 2007.
Givi recommend fitting by a qualified motorcycle mechanic.

Quantity:  

Engine Guard
CBF600 / CBF600N (04-09)

Ref: TN456

Price: £88.09 (Including VAT at 20%)

Bike-Specific Engine Guard


Information:
from 2008.
Givi recommend fitting by a qualified motorcycle mechanic.

Quantity:  

Windscreen
CBF600 / CBF600N (04-09)

Ref: D303ST

Price: £63.60 (Including VAT at 20%)

Bike-Specific transparent wind-screen.
Size: 54cm x 39.5cm (h x w)

Information:
12.5cm higher than the original windscreen
Only for CBF600

Quantity: