Top Case Mounting Set
FZ1 Fazer 1000 (06-10)

Ref: 359FZ /M5M

Price: £110.71 (Including VAT at 20%)

Bike-specific Monorack Set. This includes Monorack arms and an M5M Monolock plate, to mount a single Givi MonoLOCK Top Case. Includes the fittings required to attach M5M plate to the Monorack arms.


Information:
Givi recommend a max loading of 6kg including the Case.

Quantity:  

Top Case Mounting
FZ1 Fazer 1000 (06-10)

Ref: 359FZ

Price: £74.64 (Including VAT at 20%)

Bike-specific Monorack arms to mount a single Givi Monolock Top Case. This does not include the M5M MonoLOCK plate, which is required to mount a case.


Information:
Givi recommend a max loading of 6kg including the Case.

Quantity:  

Quick Release
Tubular Side Case Holders
V35
FZ1 Fazer 1000 (06-10)

Ref: PLXR359

Price: £187.69 (Including VAT at 20%)

A Pair of narrow profile bike-specific Tubular Side Case Holders, to mount narrow profile Givi V35 Side Cases ONLY. Includes all fittings.
Other Monokey cases will NOT fit on this mount.

The New System PLX-Rapid fitting allows you to attach and remove the side-case mounting hardware (the Tubular Side Case Holders) quickly and easily.
The new system, designated as the PLXR, is supplied with special Half-Turn screws which allow you to attach the large, visible, side-case hardware structure to much smaller supports that remain virtually unseen (see upper image).
When the side-cases are not in use, it will take a only half turn of the specially designed screws, using a GIVI key specific to your hardware, to convert the rear of your bike to it's original, hardware-free, look.
All the PLXR systems are designed for the use of any standard padlock on both the left and right sides to prevent removal of the frames from the bike.

IMPORTANT Information:
The PLXR359 will not fit on the bike on it's own - you MUST select one of these two options
Mount the PLXR359 with the 359FZ /M5M Monorack (above), OR
Purchase the 365KIT shown below - this permits mounting of the PLXR359 without the presence of a 359FZ Monorack.

Quantity:  

Fitting kit for V35
FZ1 Fazer 1000 (06-10)

Ref: PLX365KIT

Price: £18.60 (Including VAT at 20%)

Bike-specific Fitting Kit

If there is no Monorack (top case mounting) fitted to the bike, you will need this item to mount the PLXR359 Tubular Side Case Holders.
The PLXR Tubular Side Case Holders CANNOT be mounted without either this Kit or a Monorack.

Windscreen
FZ1 Fazer 1000 (06-10)

Ref: D437S

Price: £58.19 (Including VAT at 20%)

Bike-Specific smoked wind-screen.
Size: 52 x 44cm (h x w)

Information:
14cm higher than original

Quantity:  

Engine Guard
FZ1 Fazer 1000 (06-10)

Ref: TN357

Price: £78.16 (Including VAT at 20%)

Bike-Specific Engine Guard

Quantity: